BEDEC ACRYLIC WATER-BASED BARN PAINT Is a revolutionary product, ideally suited to the protection of exterior wooden, metal and plastic cladded buildings. It can be applied to previously painted surfaces - even those coated with weathered bitumen, tar varnish or creosote.
It is tough, durable and has excellent colour retention. It will flex with the substrate rather than flake or crack. Suitable for many applications including fencing, posts, guttering and weathered galvanising without the need for a primer.
Directions for Use
Stir thoroughly, check colour before use. Apply by brush roller or spray (use HVLP or Airless spray for best results). Do not apply at temperatures below 10°C or when foggy or likely to rain before the paint has dried. Ensure all surfaces are free from oil, grease, dirt, dust and loose particles. On existing painted surfaces, remove all loose and flaking paint and thoroughly rub down with abrasive paper. Any new finished wood needs to be abraded. On untreated, weathered wood, new wood, cement, render etc. or any porous substrate the first coat should be thinned with 20-30% clean water. Some surfaces are liable to have water solubles or wood treatments which can cause staining and loss of adhesion especially with white and lighter colours. Substrates to be careful of are some plywoods, red cedar wood, very resinous timber or damp walls. Test areas liable to staining and seal with Bedec Stain Block.
Coverage
Approx. 13-15 square metres per litre per coat depending upon substrate texture, porosity and application method.
Drying
Touch dry 2 hours, recoatable after 4 hours at 18°C 65% relative hhumidity.
Cleanup
Clean tools and equipment with water immediately after use.
Use On
Wood, Plastic, Concrete, Weathered Galvanised Steel, Brick & Cladding.