Bedec Interior-Flex Elastomeric Emulsion

BEDEC INTERIOR FLEX is an elastomeric matt emulsion paint formulated to coat interior ceilings and walls. Interior-Flex is a unique product designed to bridge hairline cracks and flex with the substrate where movement causes cracking with conventional matt emulsion.

A NEW TYPE OF MATT PAINT FOR INTERIOR CEILINGS AND WALL

SMOOTH MATT FINISH,  FLEXIBLE, MICROPOROUS, BREATHABLE, FINE CRACK BRIDGING, WIPEABLE WHEN DRY , EXCELLENT COVERAGE, BRUSH, ROLLER OR SPRAY APPLICATION

Directions for Use

Stir thoroughly, check colour before use. Apply by brush roller or spray. Do not apply at temperatures below 8o Centigrade.  Ensure all surfaces are free from oil, grease, dirt, dust and loose particles. On existing painted surfaces remove all loose and flaking paint and rub down with abrasive paper where necessary.  Areas affected by mould should be treated with a suitable fungicidal wash. On plasterboard or any porous substrate the first coat should be thinned with approximately 30% clean water. After preparation, brush neat Interior-Flex into hairline cracks and allow to dry. Then apply one or two full coats over the whole area as required. Larger cracks or voids will need filling with a flexible filler.

Coverage

5 litres will cover approximately 50 sq metres per coat depending upon substrate texture, porosity and application method.

Drying

Cleanup

Clean tools and equipment with water immediately after use.

Flash Point

Not applicable - water based.

Wise Precautions

Ensure good ventilation during application and drying.
Avoid contact with skin and eyes
When applying it is advisable to wear eye protection.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
After contact with skin, wash off immediately with soap and water or a recognised skin cleanser.
In case of insufficient ventilation during spraying wear suitable respiratory equipment.
Do not empty into drains or watercourses. Some local authorities have special facilities for disposing of waste paint.
Avoid the inhalation of dust. Wear suitable face mask if dry sanding.
Special precautions should be taken during surface preparation of pre 1960s paint surfaces over wood and metal as they may contain harmful lead.

Do not use solvent or white spirit.
Keep out of reach of children.